Delta Tau PMAC2A-PC/104 Instrukcja Obsługi Pobierz pdf (Strona 72)

PMAC2A-PC104 Hardware Manual

66 Acc-2P Connector Pinouts

J8 (JHW) Handwheel Encoder

Connector

Pin# Symbol Function Description

1 GND Common Reference voltage

2 HWA1+ / PUL1+ Input/Output HW1 channel A or pulse output selected by jumpers E3 and E4

3 HWA1- / PUL1- Input/Output HW1 channel a or pulse output selected by jumpers E3 and E4

4 HWB1+ / DIR1+ Input/Output HW1 channel b or direction output selected by jumpers E3 and E4

5 HWB1- / DIR1- Input/Output HW1 channel b or direction output selected by jumpers E3 and E4

6 HWA2+ / PUL2+ Input/Output HW2 channel a or pulse output selected by jumpers E3 and E4

7 HWA2- / PUL2- Input/Output HW2 channel a or pulse output selected by jumpers E3 and E4

8 HWB2+ / DIR2+ Input/Output HW2 channel b or direction output selected by jumpers E3 and E4

9 HWB2- / DIR2- Input/Output HW2 channel b or direction output selected by jumpers E3 and E4

10 +5V Output Supply voltage

J10 Ethernet Port (Optional)

Pin # Function

1 TXD+

2 TXD-

3 RXD+

4 No Connect

5 No Connect

6 RXD-

7 No Connect

8 No Connect

9 No Connect

10 No Connect

This connector is used for Ethernet communications from the

ACC-2P to a PC, and it is provided when ACC-2P Option 1B

is ordered. The appropriate Category 5 10/100-Base T network

cable that mates to this connector can be readily purchased

from any local computer store. The type of network cable to

purchase depends on the configuration to the host PC.

When making a direct connection to a Host communication

Ethernet card in a PC a “cat 5 networking crossover cable”

must be used. A standard cat 5 straight through networking

cable cannot be used in this scenario. When using a connection

to a network hub or switch, the standard cat 5 straight through

networking cable must be used, and not a crossover cable.

1 2 ... 67 68 69 70 71 72

Brak uwag

Delta Tau PMAC2A-PC/104 Instrukcja Obsługi Strona 72